JBL CONTROL 85M Two Way 5 Inch Coaxial Mushroom Landscape Speaker Single Unit
Designed for outdoor applications, the highly weather resistant Control 80 Series Landscape speakers provide excellent full-range sound quality and 360 degree coverage. Designed to be mounted on or in the ground, Control 80 Series Landscape speakers can be used in a wide variety of applications including shopping malls, theme parks, sports venues, hotels, casinos, resorts, restaurants, hospitality and leisure venues, entrance ways, and anywhere a high quality music and/or paging speaker landscape speaker is required. Compact in design, the speaker is unobtrusive and easily blends in with its surroundings. A tough polyethylene enclosure resists abuse from lawn care equipment and the elements, and the enclosure color extends throughout the material so the speaker will maintain color even when scraped or scratched.
Key Features
- 80W Pink Noise Power Handling (160W program) in direct 8 setting, plus built-in 30W 70V/100V multi-tap transformer
- Tough polyethylene highly weather resistant enclosure
- Fully isolated center chamber for wiring protection
- High fidelity sound character with broad frequency range of 55Hz – 18kHz
Technical Specifications
Frequency Response (-10dB)
55 Hz – 18 kHz
Power Rating
160 W Continuous Program (2 hrs)
80 W (320W peak), Continuous Pink Noise (2 hrs)
45 W (180W peak) Continuous Pink Noise (100 hrs)
Transformer Taps
70V: 30W, 15W, 7.5W & 3.8W
100V: 30W, 15W, 7.5W
Frequency Response (-,+3 dB)
65Hz – 16 kHz
Maximum Input Voltage
23.3 V
Sensitivity
86 dB, 1W @ 1m (ave. 80Hz – 16kHz)
Nominal Coverage Angle
360 degrees horizontal, 160 degrees vertical (primary listening 10 degrees to 50 degrees up from ground).
Directivity (Q)
2.2
Directivity Index (DI)
3.4 dB
Maximum SPL
105 dB @ 1m
Nominal Impedance
8 OHM (at 8 OHM setting)
Insertion Loss
<1.0 dB at any tap setting
Thru Setting
8 OHM nominal
Crossover Type
2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective High-Pass
65 Hz for 8 OHM operation, 24 dB/oct
60 Hz for 30W tap, 24 dB/oct
50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
Low Frequency Driver
135 mm (5.25 in) diameter LF driver, Kapton former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround.
High Frequency 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
Enclosure Material
LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated.
Grille
Powder coated stainless steel.
Environmental
IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated.
Agency Ratings UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Terminals
Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
Wiring
Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16″ in and 0.35″ in). For installation instructions see Installation Guide (# IS C80MLS).
Colors
Hunter Green, RAL6018
Dimensions (H x W x D) 432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
Net Weight
5.5 kg (12 lb)
Shipping Weight
7.3 kg (16 lb)
Included Accessories
(2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
Installer-Supplied Required Tools
22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure.
