Electro-Voice ID60DT Commercial Sound Compression Driver with 60-Watt 25/70.7-Volt Transformer
The Electro-Voice ID60DT Commercial Sound Compression Driver with 60-Watt 25/70.7-Volt Transformer is a heavy-duty compression driver for use in high-power public address installations. The drivers employ rugged phenolic diaphragms, 2-inch diameter voice coils and “rim centered” ferrite magnet structures for long life and reliability under extreme operating conditions. A hinged cycolac rear housing for easy access and connection to a sound system, via a BX conduit connector, is provided together with a plug-in, field replaceable diaphragm assembly. The ID60DT includes connections for 25-V and 70-V distributed systems and a screwdriver operated power tap select switch. The exterior is finished in durable, weatherproof paint, and all metal parts have been tropicalized for resistance to high humidity and fungus. Ideal for both indoor and outdoor applications, these drivers are well suited for any installation requiring rugged, high-power performance.
Technical Specs
Frequency Response
300 – 4,000Hz +/-5dB
Power Handling, 8 Hours, 6-dB Crest Factor
60Watts (500-5,000Hz Pink Noise)
Nominal Impedance
8Ohms
Minimum Impedance
7.5Ohms (Cobraflex Horns above 500Hz)
Voice Coil Diameter
5.08cm (2.0in)
Magnet Weight
0.48kg (1.06lb)
Magnet Material
Strontium Ferrite
Flux Density
1.17Tesla
Construction
Rugged die-cast housing with weatherproof finish for outdoor use
Mechanical Construction of Driver
1 3/8”-18 thread, ½ long allows the ID60 to be mounted on any University Sound Horn
Dimensions
Diameter: 14.3cm (5.6in.)
Height: 16.2cm (6.4in.)
Net Weight
3.6kg (7.9lb)
